English
8
2. Load
Material
Start
1. Push the red inlet
release button to
ensure proper inlet
valve operation.
4. Hold return tube over
waste bucket until
material is flowing
(approximately five
seconds).
2. Unclip the suction hose and return
tube. Place suction hose into material
container (a). Place return tube into a
waste bucket (b).
5. Turn power OFF.
3. Plug in the sprayer. Turn the
PRIME/SPRAY knob to PRIME.
Turn the power ON.
6. Place return tube into material
container and clip tube and
suction hose together.
You will need:
• The material you plan to spray
• Extension cord
• Waste bucket
1
4
l
O
2
5
3
6
l
O
ON
PRIME
OFF
(a)
(b)
