8
PEM-X1
OPERATING MANUAL
VERSION 03/2014
ORDER NUMBER DOC 2326020
2
CORRECT USE
2.1
DEVICE TYPE
Powder spray guns for manual coating of grounded work pieces
2.2
TYPE OF USE
The PEM-X1 manual powder spray gun is designed for the electrostatic coating of work
pieces with organic powders. Any other form of use is considered non-intended use.
Wagner disclaims liability for any damage resulting from non-intended use.
Electrostatic manual coating systems may only be used in spray areas equipped in
accordance with EN 12981 or under equivalent ventilation conditions.
2.3
USE IN POTENTIALLY EXPLOSIVE AREAS
In explosion hazard areas, only use approved explosion-proof electrical devices.
This type A-P electrostatic powder spray gun is suitable for processing industrial powder
paints for coating electrically conductive objects and can be used in potentially explosive
areas (zone 22). (See Chapter 3.1 Explosion Protection Identifi cation).
