EN
SinePower
Safety instructions
37
Electrical cables
!
If cables have to be fed through metal walls or other walls with
sharp edges, use ducts or wire bushings to prevent damage.
Do not lay cables which are loose or bent next to electrically
conductive material (metal).
Do not pull on the cables.
Do not lay the 230 V mains cable and the 12/24 V
g
cable in the
same duct.
Fasten the cables securely.
Lay the cables so that they cannot be tripped over or damaged.
2.3
Operating the appliance safely
!
Operate the device only if you are certain that the housing and
the cables are undamaged.
Make sure the air inlets and outlets of the device are not cov-
ered.
Ensure good ventilation.
Do
not
connect the 230 V output of the inverter (fig.
3
4,
page 4) to a different 230 V source.
Even after the fuse triggers, parts of the inverter remain live.
Always disconnect the power supply when working on the de-
vice.
_MSP702_MSP2524.book Seite 37 Donnerstag, 28. Juli 2011 9:45 21
