Installing the LCD monitor
PerfectView
46
Proceed as follows to solder two cables together:
➤
Strip the two cables (fig.
d
A, page 7).
➤
Place a shrink sleeve with a length of approx. 20 mm over the cable
(fig.
d
B, page 7).
➤
Twist the cables together and solder them (fig.
d
C, page 7).
➤
Place a shrink sleeve over the soldered point and heat it briefly (fig.
d
D,
page 7)
8
Installing the LCD monitor
8.1
Tools required (fig.
1
, page 3)
For
installation and assembly
you will need the following tools:
z
Drill bit set (1)
z
Drill (2)
z
Screwdriver (3)
z
Set of ring or open-ended spanners (4)
z
Measuring ruler (5)
z
Hammer (6)
z
Centre punch (7)
To make and test the
electrical connection
, the following tools are required:
z
Diode test lamp (8) or voltmeter (9)
z
Crimping tool (10)
z
Insulating tape (11)
z
Hot air blower (13)
z
Soldering iron (14)
z
Solder (15)
z
Cable bushing sleeves (if necessary)
To
fasten the cables
you may require additional cable binders.
_M59L_EB_10s.book Seite 46 Dienstag, 22. Januar 2008 4:59 16
Summary of Contents for PerfectView M59L
Page 4: ...PerfectView 4 2 3 4 5 2 3 1 4 5 6 _M59L_EB_10s book Seite 4 Dienstag 22 Januar 2008 4 59 16...
Page 8: ...PerfectView 8 g e f _M59L_EB_10s book Seite 8 Dienstag 22 Januar 2008 4 59 16...
Page 9: ...PerfectView 9 1 i j k 1 3 2 4 5 h _M59L_EB_10s book Seite 9 Dienstag 22 Januar 2008 4 59 16...
Page 247: ..._M59L_EB_10s book Seite 247 Dienstag 22 Januar 2008 4 59 16...
