Waeco PerfectView M59L, Installation And Operating Instructions Manual

Page: 38 / 248

Safety and installation instructions
PerfectView
38
z
When connecting to cable 31 (earth), screw the cable
– To the vehicle's earth bolt with a cable lug and a gear disc or
– To the sheet-metal bodywork with a cable lug and a self-tapping
screw.
Ensure that there is a good earth connection.
If you disconnect the negative terminal of the battery, all data stored in the
volatile memories will be lost.
z
The following data must be set again, depending on the vehicle equip-
ment options:
– Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the appropriate
operating instructions.
Observe the following installation instructions:
z
Secure the monitor in such a way that it cannot become loose under any
circumstances (sudden braking, accidents) and cause injuries to the oc-
cupants of the vehicle.
z
Secure any parts of the system covered by the bodywork in such a man-
ner that they cannot be come loose or damage other parts and cables and
impair vehicle functions (steering, pedals, etc).
z
Do not attach the monitor in the air bag deployment path, as this could
cause injury if the airbags are triggered.
z
To prevent damage, when drilling ensure that there is sufficient space on
the other side for the drill head to come out (fig.
2
, page 4).
z
Deburr all drill holes and treat them with a rust-protection agent.
z
Always follow the safety instructions of the vehicle manufacturer.
Some work (e. g. on retention systems such as the AIRBAG etc.) may
only be performed by qualified specialists.
_M59L_EB_10s.book Seite 38 Dienstag, 22. Januar 2008 4:59 16