Waeco PerfectView M59L, Installation And Operating Instructions Manual

Page: 42 / 248

Technical description
PerfectView
42
The remote control has the following control elements:
No. in
fig.
9
, page 6
Label Meaning
1 STANDBY Switches the power supply on/off (standby)
2 DOWN This button has three functions:
z
normal mode: decrease volume
z
after calling up the menu: change a setting within a
function (e. g. contrast)
z
when in reverse gear: move the distance markers
downwards
3 MENU Calls up the menu onto the monitor.
You can call up four menus. Press the button again
to call up each subsequent menu.
z
PICTURE/BILD: picture setting (e. g. brightness)
z
USER/NUTZER: select system function (e. g. lan-
guage)
z
TIME/UHRZEIT: set date and time
z
INSTALL/AUSWAHL: select application (e. g.
mirror function)
4 UP This button has three functions:
z
normal mode: increase volume
z
after calling up the menu: change a setting within a
function (e. g. contrast)
z
when in reverse gear: move the distance markers
upwards
5 SELECT This button has two functions:
z
select video source (CA1
→
CA2
→
AV
→
CA1 …)
z
after calling up the menu: select functions (e. g. pic-
ture setting)
6 PICTURE Calls up the functions for setting the picture
parameters and volume:
z
CONTRAST
z
BRIGTNESS
z
COLOR
z
TINT
Press the “UP” or “DOWN” button to effect the
desired setting.
7 DIMMER Decreases brightness to night mode.
8 C1 Selects camera 1.
9 C2 Selects camera 2.
10 C3 Not available
11 AV Selects the video input (RCA).
_M59L_EB_10s.book Seite 42 Dienstag, 22. Januar 2008 4:59 16