Waeco DC-Kit3, Installation And Operating Manual, Page: 30 / 160

Installing and connecting the DC kit
DC-Kit3
30
➤
Lay the control cable of the roof air conditioner to the ECL-102 charging
current distributor.
➤
Connect the control cable with connections I2 and I3 of the charging cur-
rent distributor (
ECL-102) (fig.
3
1 and 2, page 4).
➤
Attach the air outlet of the roof air conditioner ( CA2500) (fig.
4
,
page 4).
7.5 Connecting the B2200 Dometic roof air conditioner
I Note
Connect roof air conditioners with a serial number lower than
802200001 in the way described in chapter “Connecting the B1600
and HB2500 Dometic roof air conditioner” on page 30.
➤
Remove the outlet panel of the roof air conditioner, if necessary also
remove the upper cover (
B2200) (fig.
6
, page 5).
➤
Join on/off cable for B2200 to the plug connector on the circuit board
(fig.
7
, page 5).
I
Note
Guide the on/off cable carefully past the fan.
➤
Join the universal connection cable to the on/off cable of the B2200.
➤
Connect the universal connection cable with connections I2 and I5 of the
charging current distributor (
ECL-102) (fig.
3
1 and 2, page 4).
➤
Attach the outlet panel of the roof air conditioner ( B2200) (fig.
6
,
page 5).
➤
Run the connection cable of remote control FB1 to the inverter and con-
nect (
ECW-012VS).
7.6 Connecting the B1600 and HB2500 Dometic roof
air conditioner
➤
Connect the D+-output on the light system using a 1 mm² cable to
connection I2 of the changing current distributor (
ECL-102) (fig.
3
1,
page 4).
➤
Connect the I5-output of the ECL-102 to the control cable connection on
the MCR9 remote control (fig.
8
1, page 6).
DC-Kit3.book Seite 30 Freitag, 13. Juni 2008 3:24 15