Waeco DC-Kit3, Installation And Operating Manual, Page: 29 / 160

DC-Kit3
Installing and connecting the DC kit
29
7.1 Preparing the installation
➤
Disconnect the following voltage supplies in the vehicle:
– Positive battery terminal
– External voltage supply
7.2 Installing components
➤
Install the ECL-102 charging current distributor.
➤
Install the MSK1500-012 inverter.
➤
Install the MCR9 remote control.
➤
Install the VS-230-2 priority circuit.
e
Danger of electrocution
Only connect the battery once you have the completed all the in-
stallation work and you are certain it has been done properly.
7.3 Connecting the CA1000 Dometic roof air
conditioner
➤
Remove the air outlet of the roof air conditioner ( CA1000) (fig.
1
,
page 3).
➤
Insert the on/off cable for CA1000 into the socket on the control board of
the roof air conditioner (fig.
2
1, page 3).
➤
Lay the on/off cable of the roof air conditioner to the ECL-102 charging
current distributor.
➤
Connect the on/off cable with connections I2 and I3 of the charging
currentdistributor (
ECL-102) (fig.
3
1 and 2, page 4).
➤
Attach the air outlet of the roof air conditioner ( CA1000) (fig.
1
,
page 3).
7.4 Connecting the CA2500 Dometic roof air
conditioner
➤
Remove the air outlet of the roof air conditioner ( CA2500) (fig.
4
,
page 4).
➤
Cut the cable loop of the CA2500 on/off cable through the middle
(fig.
5
A, page 4).
➤
Connect the control cable to the on/off cable (fig.
5
B, page 4).
DC-Kit3.book Seite 29 Freitag, 13. Juni 2008 3:24 15