EN
97
ASC5500G RPA
Operation
3. In the basic menu, use the cursor keys
or
to select
“Short
selection”
:
4. Press
ENTER
to confirm.
5. Use the keypad (
8
) and the cursor keys to enter the vehicle data.
6. Press
ENTER
to confirm.
7. Enter the refrigerant filling quantity. Use the value shown on the
filling quantities sticker in the vehicle and enter it using the keypad
(
8
) and the cursor keys and press
ENTER
.
8. Use the cursor keys
or
to select whether the air conditioning
system has two°connections (high pressure and low pressure) or
only one connection (high pressure or low pressure).
Press
ENTER
to confirm.
✓
The fully automatic air conditioning service is started.
The refrigerant is analysed during the air conditioning service (see
chapter “Analysing refrigerant” on page 91).
✓
After the air conditioning service has finished, you will be prompted to
disconnect the hoses (
13
) and (
14
) of the AirConServiceCenter from
the vehicle air conditioning system.
9. Disconnect the service hoses (
13
) and (
14
) and press
ENTER
to
confirm.
The service hoses will now be drained. The unit is then ready for
further use.
10. Put the valve caps of the vehicle air conditioning system back on the
connections.
Short selection
Free selection
Other selections
ENTER-OK
HP/LP
PORT
HP
PORT
LP
PORT
ENTER-OK STOP-EXIT
Summary of Contents for ASC5500G RPA
Page 2: ......
