EN
Service tasks
ASC5500G RPA
120
9.6
Changing the vacuum pump oil
!
1. Before changing the oil, let the vacuum pump run for about 10 min-
utes (manually, via the menu).
The following steps may only be performed by qualified personnel.
2. Take off the front panel:
Undo the screws (
D
) on the control panel and lift it up. Then undo the
screws (
E
) on the bottom of the front panel and take it off.
3. Place a receptacle with a capacity of at least ½ litre under the
AirConServiceCenter. The oil from the vacuum pump flows through
the opening (
I
) in the base of the unit.
WARNING!
Switch off the AirConServiceCenter and unplug it from the power
supply before opening the housing.
D
E
D
E
G
J
I
H
Summary of Contents for ASC5500G RPA
Page 2: ......
