Wacker Neuson G 240, Operator'S Manual

Page: 72 / 254

wc_tx003229gb_FM10.fm
72
Mobile Generator
Working with Basler Controller
8.4 Using the Metering and Settings Menus
Background The various menus of the genset controller are divided into two main categories:
METERING, and SETTINGS. Access to the METERING menu and to the
SETTINGS menu is done through the MAIN MENU.
METERING
menus METERING menus give detailed information regarding engine status and
generator performance. The machine must be running for many of the parameters
to be active. Use the menu diagram of the genset controller as a guide for
navigating the menus.
Parameters under the METERING menu are read-only. They cannot be changed,
except for HRS to MAINTENANCE parameter, which can be reset.
SETTINGS
menus SETTINGS menus give detailed information regarding genset controller
configuration. Use the menu diagram of the genset controller as a guide for
navigating the menus.
There are a limited number of parameters under the SETTINGS menus that may
be changed by the user. These parameters are:

LCD screen contrast

Time and date

Sender fail time delays

Units of measure (imperial or metric)

Low fuel pre-alarm level

Low fuel alarm level

Cooldown time

Pre-crank time delay

Maintenance interval
Procedures for changing these parameters are included in this manual.
Generator
—
Up
—
Generator Protection
—
Voltages
—
Hrs to Maintenance
Hours to maintenance
—
—
Inputs
—
—
—
Menu Item Description Menu Item Description