Wacker Neuson G 240, Operator'S Manual

Page: 37 / 254

wc_tx003570gb_FM10.fm
37
Mobile Generator Lifting and Transporting
4.2 Before Towing Checklist
Before towing the machine, check the licensing requirements for trailers in your
area. Also check the following items:
Towing vehicle

Check that the towing vehicle is rated to tow the load.

Check that the towing vehicle is in serviceable condition.

Do any necessary service/maintenance on the towing vehicle.
Hitch and coupler

Check that the towing vehicle and hitch have a rating equal to or greater than
the GVWR of the machine. See
Technical Data .

Check that the hitch of the towing vehicle and coupler of the trailer are compatible.

Check the condition of both the coupler and the hitch.

Check that all fasteners on the coupler are tight.

Check that the coupler has fresh grease applied to it.
Wheels

Check that wheel chocks are available at the work site.

Check that all lug nuts are in place and are properly torqued.

Check the tread wear of the tires.

Check that the tires are inflated to the proper pressure.
Trailer preparation

Check that all doors and access panels are closed and latched.

Check that outriggers (if applicable) are retracted.

Check local regulations regarding hazardous materials placards. If applicable,
install the appropriate placards.
Trailer operation

Check that the trailer jacks are in the traveling (horizontal) position.

Check that the directional and running lights on the trailer function correctly.

Check that the safety chains of the trailer are connected to the towing vehicle
using a crisscross pattern.

Check the operation of the trailer brakes by braking the towing vehicle at a slow
speed. Both the vehicle and the trailer must brake smoothly. If the trailer pushes,
check the fluid level in the surge brakes or the operation of the electric brakes.

Check that the trailer’s breakaway cable (if applicable) is attached to the towing
vehicle.

Test the function of the breakaway system (if applicable).