Wacker Neuson G 240, Operator'S Manual

Page: 55 / 254

wc_tx003618gb_FM10.fm
55
Mobile Generator Operation (Basler Controller)
7.2 Engine Start Switch
Description The engine start switch (a) is a three-position switch: “REMOTE START”, “OFF”,
and “START/RUN”.
Function
AUS AUS
APAGADO APAGADO
ARRET ARRET
OFF OFF
REMOTE START REMOTE START
FERNSTART FERNSTART
ARRANQUE REMOTO ARRANQUE REMOTO
DEMARRAGE A DEMARRAGE A
DISTANCE DISTANCE
START / LAUFEN START / LAUFEN
ARRANQUE / MARCHA ARRANQUE / MARCHA
DEMARRER / MARCHE
DEMARRER / MARCHE
START / RUN START / RUN
a
wc_gr011436
Position Function LCD Screen
REMOTE START This position is used when the generator is
being operated as a stand-by power supply, and
it is connected to a remote switch. The
generator is in stand-by mode and will not start
until the remote switch is activated (closed). READY screen
START/RUN This is the normal start and run position. When
set to this position, power is supplied to the
genset controller which immediately launches
the start-up sequence.
As a precaution, be prepared for engine startup
anytime the engine start switch is in the
REMOTE START position. Monitoring
screen
OFF Power to the genset controller is disconnected. Blank screen (off)