Wacker Neuson G 100, Operator'S Manual

Page: 79 / 98

G 100 / G 120 Maintenance
wc_tx000996gb.fm
79
6. If necessary, enter your password. (See Entering Passwords for more
information.)
7. When prompted, select YES and press the check mark button.
8. Exit by repeatedly pressing the left arrow button (4) until the LCD panel display
returns to monitoring status.
7.4 Replacing the Air Filter Element
Prerequisites
„
Machine shut down
„
Yellow indicator of the engine air filter gauge has reached the red line
Background The air cleaner assembly contains a one-piece single element air filter cartridge
(c) . This cartridge must be replaced when the yellow indicator of the engine air filter
gauge reaches the red line.
Procedure Follow the procedure below to replace the primary air filter element.
9. Remove the end cover (d) , then discard the entire air filter cartridge (c).
10.Insert a new air filter cartridge.
11.Re-install the end cover, making sure that the dust cap is clean and pointing
downward.
12.Make sure that the intake piping (a) is fully engaged over the neck of the filter to
ensure a good seal.
Maintenance
„
Periodically, make sure the inlet pipe is free from obstructions.
„
Check all connections and make sure they are snug. An air leak at the neck
clamp, gauge connection, or intake pipe can quickly lead to engine damage.
„
If the filter housing, gauge connection, neck, or inlet pipe are crushed or
damaged, replace them immediately.
wc_gr005198
c a
d