Wacker Neuson G 100, Operator'S Manual, Page: 12 / 98

Safety Information G 100 / G 120
12
wc_si000291gb.fm
This machine is intended for the purpose of supplying electrical power
to connected loads. Refer to the product specifications for the output
voltage and frequency of this generator, and for the maximum output
power limit of this generator.
This machine has been designed and built strictly for the intended use
described above. Using the machine for any other purpose could
permanently damage the machine or seriously injure the operator or
other persons in the area. Machine damage caused by misuse is not
covered under warranty.
The following are some examples of misuse:
• Connecting a load that has voltage and frequency requirements
that are incompatible with the generator output
• Overloading the generator with a load that draws excessive
power during either continuous running or start-up
• Operating the generator in a manner that is inconsistent with all
federal, state and local codes and regulations
• Using the machine as a ladder, support, or work surface
• Using the machine to carry or transport passengers or equipment
• Using the machine to tow other machines
• Operating the machine outside of factory specifications
• Operating machine in a manner inconsistent with all warnings
found on the machine and in the Operator’s Manual
This machine has been designed and built in accordance with the
latest global safety standards. It has been carefully engineered to
eliminate hazards as far as practicable and to increase operator
safety through protective guards and labeling. However, some risks
may remain even after protective measures have been taken. They
are called residual risks. On this machine, they may include exposure
to:
• Heat, noise, exhaust, and carbon monoxide from the engine
• Fire hazards from improper refueling techniques
• Fuel and its fumes
• Electric shock and arc flash
• Personal injury from improper lifting the trailer tongue
• Typical hazards related to towing a trailer on roads and highways
To protect yourself and others, make sure you thoroughly read and
understand the safety information presented in this manual before
operating the machine.