Wacker Neuson G 100, Operator'S Manual, Page: 76 / 98

Factory-Installed Options G 100 / G 120
76
wc_tx000997gb.fm
6.8 Quick-Disconnect Fuel Fittings
Quick-disconnect fuel fittings allow an external fuel supply to be connected to the
engine.
Requirements
„
Engine stopped and cool to the touch
„
Fuel supply and return hoses with compatible quick-disconnect fittings
Note: Required fitting size is ISO 7241-1-Series B (3/8 in.)
Procedure Perform the following procedure to connect the external fuel supply.
1. Feed the external supply hose (b) and the external return hose (c) through the
access port (a) on the curb side of the machine.
2. Disconnect the internal feed hose (d) at the tank fitting, and connect the internal
feed hose to the external supply hose.
3. The internal return hose (e) (not shown) is located on the opposite side of the
machine. Disconnect the internal return hose from the tank fitting, and connect it
to the external return hose (c) .
Result The external fuel supply is now connected.
wc gr008405
a
b
c
d
e
WARNING
Fire hazard. Improper connections or damaged hoses may leak flammable fuel.
f
Ensure that all quick-disconnect fittings are properly seated before operating
the machine.
f
Make sure that fuel hoses are not kinked. Ensure that the hoses will not touch
or rest upon hot surfaces while the machine is operating.