Troubleshooting the Burner
Cub 200/300
40
ghi_tx001207gb.fm
Continued from the previous page.
7. Turn the machine off.
8. Remove the screws
(c)
that hold the control panel and pull the control panel
from the machine.
9. Remove the cover
(d)
from the control.
10.Turn the machine on.
11.Measure the voltage at terminals
M17
and
M16
.
Is 108–132 VAC measured?
This procedure continues on the next page.
WARNING
Electric shock hazard. High voltage exists at the control panel when the machine is
turned on. Electric shock can cause severe injury or death.
f
Use extreme care and appropriate arc flash protective measures when working
inside the machine.
Yes ____
No ____
Continue.
The control board has failed. Disconnect the power supply and
replace the control board.
Summary of Contents for Cub 200
Page 1: ...Repair Manual Indirect Fired Air Heater Cub 200 Cub 300 0179422en 001 1009 0 1 7 9 4 2 2 E N...
Page 4: ...Foreword Cub 200 300 ghi_tx001204gb fm 4...
Page 15: ...Cub 200 300 Operation ghi_tx001205gb fm 15 Notes...
Page 59: ...Cub 200 300 Schematic ghi_tx001210gb fm 59 7 Schematic 7 1 Cub 200 Cub 300 Schematic...
