Cub 200/300
Burner Setup
ghi_tx001317gb.fm
21
3.3
Removing and Installing the Burner Assembly
Background
Before performing any maintenance on the burner assembly, it must be removed
from the machine.
Removal
To remove or install the burner assembly perform the following procedure:
1. Shut down the machine and allow it to cool.
2. Disconnect the power cord from the power supply.
3. Remove the two bolts and open the access panel
(a)
.
4. Rotate the burner assembly
(b)
counterclockwise and remove it from the flame
head and air tube assembly
(e)
.
Installation
Perform the procedure below to install the burner assembly.
1. Place the burner assembly
(b)
into the flame head and air tube assembly
(e)
.
2. Rotate the burner assembly clockwise to lock it into place.
3. Close the access panel
(a)
and re-install the two bolts that secure it.
Summary of Contents for Cub 200
Page 1: ...Repair Manual Indirect Fired Air Heater Cub 200 Cub 300 0179422en 001 1009 0 1 7 9 4 2 2 E N...
Page 4: ...Foreword Cub 200 300 ghi_tx001204gb fm 4...
Page 15: ...Cub 200 300 Operation ghi_tx001205gb fm 15 Notes...
Page 59: ...Cub 200 300 Schematic ghi_tx001210gb fm 59 7 Schematic 7 1 Cub 200 Cub 300 Schematic...
