![background image](http://html1.mh-extra.com/html/wacker-neuson/crt48-35v/crt48-35v_operators-manual_3134123075.webp)
wc_tx004196gb_FM10.fm
75
CRT48
Troubleshooting
9
Troubleshooting
Problem
Cause
Remedy
Engine doesn’t start
No fuel in tank
Add fuel.
Battery connections loose
or corroded
Check and clean battery
connections.
Battery charge low
Charge or replace battery.
Defective starter
Replace starter.
Engine is hard to start.
No fuel in tank
Add fuel.
Bleed fuel lines.
Battery charge low
Charge or replace battery.
Fuel filter clogged
Replace fuel filter.
Fuel circuit failure
Check fuel lines.
Machine out of balance;
wobbling excessively
Trowel arm(s) bent
Replace trowel arm(s).
Trowel arm(s) out of
adjustment
Adjust trowel arm(s).
Trowel blade(s) bent
Replace trowel blade(s).
Poor handling; excessive
free play in steering
mechanism
Worn pivot bearings, rod
ends, and/or cylinder
mounts
Inspect pivot bearings, rod
ends, and cylinder mounts.
Replace as needed.
Machine does not move
Drive belt broken
Replace drive belt.
A vacuum exists between
bottom of blades or pans
and surface of concrete
Change pitch on blades or
actuate steering system to
break suction.
Key sheared in the gearbox
output shaft
Replace damaged key.
Summary of Contents for CRT48-35V
