![background image](http://html1.mh-extra.com/html/wacker-neuson/crt48-35v/crt48-35v_operators-manual_3134123057.webp)
wc_tx004194gb_FM10.fm
57
CRT48
General Maintenance
Reassembly
Perform the procedure below to reassemble the belt drive.
1. Align the pillow bearing and shaft as straight as possible. Adjust pulley offset
and center distance to values as shown.
2. Re-install the three bolts and torque to 14 ±1.4 Nm (10 ±1 ft.lbs.).
3. Re-install the beltguard.
4. Reconnect the battery.
Result
The drive belt has now been replaced.
Summary of Contents for CRT48-35V
