Wacker Neuson CRT48-35V, Operator'S Manual

Page: 31 / 116

wc_tx004192gb_FM10.fm
31
CRT48 Lifting and Transporting
3.2 Preparing the Machine for Transport on a Truck or Trailer
Requirements
■
Machine stopped
■
Flatbed truck or trailer capable of supporting the machine’s weight
■
Chains, hooks, or straps capable of supporting the machine’s weight
Checklist Before transporting the machine, check the following items:

Check that the transport vehicle or trailer can support the weight of the machine.

Check that the transport vehicle or trailer is wide enough to support the
machine.

Check that the wheels of the transport vehicle or trailer are chocked during the
loading process.

Check that the transport vehicle or trailer is clean and free of grease, oil, ice,
and other loose material.

If the machine is mounted to a trailer, do not use the machine’s trailer jack to
support the trailer tongue during transporting.

Check that any ramps used in the loading process:
■
Can support the weight of the machine.
■
Are clean and free of grease, oil, ice, and other loose material.
■
Are securely connected to the transport vehicle or trailer.
■
Are of sufficient length to keep the loading angle 15° or less.
In addition:

Check that the loading area is flat and the ground is stable.

Check the overall height of the machine once it is loaded on the truck or trailer.

Plan your travel route so there will be adequate clearance for overpasses, road
signs, buildings, etc.

Check local regulations regarding transporting and obey these regulations.
WARNING
Crushing hazard. Improperly securing the machine can lead to a crushing hazard.
►
Use only the designated tie-down points to secure the machine to a truck or
trailer.