Maintenance work
T01127en.fm
66
8.11 Remounting the cutting attachment
Loosen the nuts (
5
).
Loosen the tension screw (
3
) (counterclockwise) until you see the
screw end (
4
) in the gap. Release the screw (detail
X
, only on BTS
1140L3) and remove it. Unscrew the nuts (
5
) and remove the cover (
6
).
Pry out the stop pin (
8
) with the combination wrench (
9
) far enough, as
shown in the figure, so that you are able to turn the protective hood
(
11
).
65
66
