T01126en.fm
41
Starting up
7.
Starting up
NOTICE:
Before working on the cut-off saw, always turn off the en-
gine, pull off the spark plug connector and wear protective
gloves!
NOTICE:
The cut-off saw must not be started until it has been com-
pletely assembled and tested!
Always use the assembly tools included in delivery for the following
procedures:
1 Combination wrench 13/19 mm
2 Offset screwdriver
3 Screwdriver for setting the carburetor
4 Adapter ring (not usually included in delivery)
NOTE: Only for the BTS 1140L3 model
No air cleaner mounted!
Before starting operation, insert the oiled foam air cleaner (prefil-
ter) as shown in illustration 31! First remove the filter cover (see
chapter Cleaning/Changing the air cleaner).
Knead the foam air cleaner in the packaging prior insertion to ensure
distribution of the oil. Remove the packaging afterwards.
30
31
