Safety information
SV00080en.fm
32
4.11.3 When truing stone slabs you only need to grind one groove (to prevent
unnecessary dust formation), and then place the slab on a flat base
and knock off the overhanging piece (25).
NOTICE!
For cutting to length, prevent the cut section from pinching the cutting
blade and to avoid injuries due to falling parts, determine the direction
of the cut and the order of the steps to be carried out.
4.12 Transport and storage
4.12.1
Turn off the cut-off saw when transporting it or moving it to an-
other location while working
(26)
.
4.12.2 Never carry or transport the cut-off saw while the engine or the cutting
blade is running!
4.12.3 Use only the bow handle grip to carry the cut-off saw. The cutting blade
points to the rear (26). Do not touch the muffler (can cause burns).
4.12.4 For transport over a substantial distance, use a wheelbarrow or a cart.
4.12.5 When transporting by truck ensure that the cut-off saw is in a stable po-
sition so that that no fuel runs out. Always detach the cutting blade
when transporting by truck.
25
26
