background image

Troubleshooting

12.1 Troubleshooting machine

52

Operator’s Manual | APS | 5100060593 | 02/2022 | [en]

12

Troubleshooting

12.1

Troubleshooting machine

 WARNING

Danger to life due to unauthorized troubleshooting!

If faults occur on this machine which are not described in these oper-
ating instructions, contact the manufacturer.

Do not rectify faults on your own.

NOTICE

Possible error message on the rechargeable battery

If the machine is started too quickly, error messages may appear on the
accumulator.

Wait at least 4 seconds after activating the rechargeable battery.

Then continue with the starting procedure.

Fault

Possible cause

Remedy

The machine will not operate.

On/Off switch is not off.

Move the switch to position 0.

Rechargeable battery is not activ-
ated.

Activate rechargeable battery.

The charge condition of the re-
chargeable battery is too low.

Charge the rechargeable battery.

The rechargeable battery is not in-
serted correctly into the machine.

Insert the rechargeable battery cor-
rectly into the machine.

The rechargeable battery is defect-
ive.

Have the rechargeable battery re-
paired.*

The machine is displaying unexpec-
ted faults when putting into opera-
tion or operation.

Troubleshooting Observe re-
chargeable battery.

Deactivate the rechargeable battery
and remove it from the machine. If
the fault persists, have the re-
chargeable battery repaired.*

The machine switches itself off.

The charge condition of the re-
chargeable battery is too low.

Charge the rechargeable battery.

The machine was overloaded.

Switch the machine on again.

Machine is overheated.

Let the machine cool down.

Machine under temperature.

Operate the machine only within the
permissible temperature range,
Technical Data.

* Have this work carried out by a service partner.

Summary of Contents for APS1030





































































Reviews: