WABECO CC-D6000 hs Operating Instructions Manual Download Page 62

Page: 62 / 168

17. Operating elements

17.5 D6000-C lathes with 1.4 kW motor with trapezoidal-threaded spindle

Potentiometer rotating knob for speed selection of the electrical drive motor

Emergency off switch

Turn switch for forwards-reverse - main spindle

ON/OFF switch with low voltage trigger

Tensioning nut for tool clamping plate

Holding screw for longitudinal skid

Clamping screw for clamping the tool skid

Ball crank for adjusting the longitudinal skid

Clamping lever for securing the tailstock sleeve

10. Clamping lever for tailstock quick tensioning

11. Ball crank for adjusting the tailstock sleeve

12. Tensioning nut for securing the tailstock to the guides

13. Switch lever for opening and closing the clasp nut

13.1 Threaded pin for securing the switch lever in CNC mode

14. Ball crank for adjusting the transverse skid

15. Hand wheel for quickly adjusting the tool skid

16. Safety screw for the drive protection hood

17. Chuck protection hood

Summary of Contents for CC-D6000 hs









































































































































































Search results

Summary of Contents for CC-D6000 hs

Reviews:

Related manuals for CC-D6000 hs

Brands by name

Popular brands

WABECO CC-D6000 hs, Operating Instructions Manual

Search results

Summary of Contents for CC-D6000 hs

Reviews:

Related manuals for CC-D6000 hs

Brands by name

Popular brands