WABECO CC-D6000 hs Operating Instructions Manual Download Page 68

Page: 68 / 168

17. Operating elements

17.11 CC-D6000 lathes with 1.4 kW motor with trapezoidal-threaded spindle

Tensioning nut for tool clamping plate

10. Holding screw for longitudinal skid

11. Clamping screw for clamping the tool skid

12. Ball crank for adjusting the longitudinal skid

13. Clamping lever for securing the tailstock sleeve

14. Clamping lever for tailstock quick tensioning

15. Ball crank for adjusting the tailstock sleeve

16. Tensioning nut for securing the tailstock to the guides

17. Switch lever for opening and closing the clasp nut

17.1 Threaded pin for securing the switch lever in CNC mode

18. Ball crank for adjusting the transverse skid

19. Hand wheel for quickly adjusting the tool skid

20. Safety screw for the drive protection hood

21. Chuck protection hood

Summary of Contents for CC-D6000 hs









































































































































































Search results

Summary of Contents for CC-D6000 hs

Reviews:

Related manuals for CC-D6000 hs

Brands by name

Popular brands

WABECO CC-D6000 hs, Operating Instructions Manual

Search results

Summary of Contents for CC-D6000 hs

Reviews:

Related manuals for CC-D6000 hs

Brands by name

Popular brands