WABCO OptiTire, System Description

Page: 50 / 72

50
Requirements for the start-up Start-up
7.3 Diagnostic hardware
Diagnostic components for towing vehicle
The CAN diagnostic cable (WABCO part number 446 300 348 0) is used for
diagnosing towing vehicles.
Diagnostic components for trailers
When carrying out diagnosis on trailers, please extract the WABCO part number
of the required diagnostic components from the chart:
SYSTEM IN TRAILER
VEHICLES REQUIREMENTS DIAGNOSTIC HARDWARE
VCS
ECAS
TEBS before 2004
Depends on system
Diagnostic cable
446 300 329 2
TEBS since 2004
VCS II
ISO 7638 breakout box with CAN
socket
446 300 360 0
Diagnostic Interface
(DI-2) with USB port (for
connection to a PC)
446 301 030 0
CAN diagnostic cable
446 300 361 0 (5 m)
TEBS E Premium
External diagnostic socket with
yellow cap
449 611 XXX 0
Diagnostic Interface
(DI-2) with USB port (for
connection to a PC)
446 301 030 0
CAN diagnostic cable
446 300 348 0
7.4 Installing the Diagnostic Software
Proceed as follows to put the OptiTire
TM
into operation with the Diagnostic
Software:
– Make sure that the OptiTire
TM-
system is installed according to the
instructions (

see chapter "6 Installation" on page 36).
– Connect the computer to the vehicle using the diagnostic cable and
Diagnostic Interface.