WABCO OptiTire, System Description

Page: 20 / 72

20
System description System description
4.4 Expert’s report / certificates
Expert’s reports / Certificates for mounting and additional mounting of OptiTire
TM
are available, which significantly facilitate approval of vehicle registration
papers. Customers must also include the relevant details in the operating
instructions.
– Open the WABCO INFORM online product catalogue:
http://inform.wabco-auto.com
– Search for the desired expert’s report / certificate by entering the index word
"OptiTire".
4.4.1 ATEX
As the WM2 has its own battery and is attached to the outside of the wheel,
it falls under the ATEX directive to be used as explosion-proof equipment
for potentially explosive gas atmospheres up to zone 1. It fulfils the relevant
requirements.
Expert’s report / certificate
„
WM2: Associated EU type test certificate
TÜV 04 ATEX 2418 X
„
Application area ADR (G: potentially explosive gas
atmospheres):
II 2G Ex ib IIC T4
!
The device is rated as being a small piece of electrical equipment, and therefore
the marking does not contain the complete information in accordance with
directives or standards. The manufacturer of the sensor is WABCO GmbH, Am
Lindener Hafen 21, 30453 Hanover.
4.4.2 Radio approvals
The OptiTire components contain a radio transmitter for the 433 MHz ISM
waveband. The output power is less than 1 mW. The following approvals are
available:
Expert’s report / certificate
„
CE: 2014 / 53 / EU (RED)
„
FCC: Part 15
„
IC: RSS-210 Issue 8, RSS-GEN Issue 4, RSS-102 Issue 5
!
In accordance with 2014 / 53 / EU, Article 12, Paragraph 3, the manufacturer
can be contacted at the following address:
WABCO Europe bvba, Chaussee de La Hulpe 166, 1170 Brussels (Belgium).