W6 W6 N 454D, Manual

Page: 26 / 48

26 www.w6-wertarbeit.de
Threading the left needle
The threading path of the left needle is marked
in yellow. A sketch of the threading paths can
be found on the inside of the front flap.
• Switch off (OFF) the sewing machine at
the main switch.
• Lift the presser foot using the lifter lever.
• Put the spool on the spool stand.
• Turn the hand wheel until the needle bar
is in the upper position.
• Pull the thread forward through the eyelet
of the thread guide.
• Guide the thread through the thread
guide as shown.
• Hold the thread with one hand and pull it
through the tension discs with the other
hand.
Insert the thread into the front thread guide
(2) from below, place it behind the thread
lever cover and wind it around the front
thread guide (3).
Place the thread into the left slot of the
thread guide. Pull the thread through the
eyelet on the needle bar and thread the
needle from front to back. Pull out the thread
by approx. 10 cm.