E P 1 P R I V A C Y C H A R G I N G C A S E P R O D U C T M A N U A L |
6
1. Getting Started
1.7 To Remove the EP1 Case from
Your iPhone
1. Place your phone face down on a level surface.
2. Grip the sides of the case with both hands, and apply firm
pressure to the sides of the bottom portion of the case, just
below where the top and bottom portions connect.
3. Pull the bottom portion away from the top.
4. Slide the top portion off of your iPhone.
1.8 To Use the Headphone Jack
A headphone jack is included with the purchase of your EP1 case.
To use the headphone jack:
1. Locate the headset jack on your EP1 case.
2. Insert the 3.5mm male end of the headphone jack through the
audio jack on your EP1 case.
3. Connect any 3.5mm audio cable or headset to the other end
of the headphone jack.
