E P 1 P R I V A C Y C H A R G I N G C A S E P R O D U C T M A N U A L |
5
1. Getting Started
1.4 To Charge Your EP1 Case
Connect the EP1 case to a power source using the micro USB
cable included in the EP1 case packaging. The micro USB cable
should only be used with recommended power sources, including
a “Made for iPhone” USB wall adapter.
Once you connect the EP1 case to a power source, the battery life
indicator’s LED lights will light up to reflect the current battery
charge available on the EP1 case.
NOTE:
Both the top and bottom portions must be connected
to charge your case.
Your EP1 case will come charged and ready to use out of the
packaging, but will need to be charged after its initial use.
The time it takes to charge the EP1 case will vary based on the
charging method. Generally, a completely drained EP1 case will
take less than 3 hours (using a wall outlet) to charge using the
micro USB cable included in the EP1 case packaging and a
USB power source.
1.5 To Charge Your iPhone Using the
EP1 Case
1. Locate the power switch next to the battery life indicator on
the back of the EP1 case.
2. Turn the case power switch to the left, so that the plus (+) sign
is visible to begin charging the iPhone via the EP1 case’s
built-in battery.
3. When the iPhone has been fully charged, turn the power switch
to the “off” position.
NOTE:
It is normal for your EP1 case to feel warm while in use.
1.6 To Check the Battery Level of Your
EP1 Case
Press the status button on the back of your EP1 case. The LED
lights in the battery life indicator will light up to indicate the
battery power available on the case. Each letter of the VYSK LEDs
represents 25% battery power, as follows:
VYSK = 76-100%
VYS = 51-75%
VY = 26-50%
V = 0-25%
