38
How to Service the Air Filter (see figure 2 )
1. Remove the air cleaner outside cover (A). Be careful to prevent dirt and debris from
falling into the air cleaner assembly.
2. Separate the Air Filter (A) from the Air Filter Housing (B).
3. Inspect the air filter. Clean dirty air filter with warm water and mild soap. Allow air filter
to dry thoroughly before re-installation
4. Install the air filter assembly onto the carburettor and secure with screw.
Note:
Do not use pressurised air or solvents to clean the filter. Pressurised air can
damage the filter and solvents will dissolve the filter.
How to Remove Oil
CAUTION
Used oil is a hazardous waste product and
must be disposed of properly. Do not discard
with household waste. Check with your local
authorities, service centre, or dealer for safe
disposal/recycling facilities.
Removing Oil
The oil must be drained from the Oil Drain Plug (See figure 3)
1. Remove the dipstick (C)
2. Please use an approved container below the oil drain plug.
3. Remove the Oil drain plug (D) and allow oil to the drain into the approved container.
4. Install Oil drain plug (D) and wrench tighten.
Summary of Contents for VF3600P
Page 13: ...13 PRESSURE WASHER 3600P Component identification...
Page 42: ...42...
Page 43: ...43 PRESSURE WASHER 3600P...
