| Instruction manual
14
8.3 Installing the stage insert
1
When using the glass stage, make sure that the insert
is horizontal.
2
Install the stage insert in the stage opening. (Fig. 5)
8.4 Installing the eyepieces
Insert both eyepieces into the tubes of the optical head. (Fig. 6)
8.5 Installing the condenser
1
Insert the condenser illumination unit into the bracket. (Fig. 7)
2
Turn the condenser illumination unit clockwise about 90°,
with the “AS” mark of filter holder facing front. Align the
screw of the condenser illumination unit and the hole of the
holder, then screw the bolt in the hole with the supplied Allen
wrench. (Fig. 8)
FIGURE 5
FIGURE 6
FIGURE 7
FIGURE 8
