Instruction manual |
17
6
Plug the monitor power supply in the connector “F” on the monitor.
(Fig. 17)
7
Plug the other side of the HDMI cable in the connector “G” on the
monitor. (Fig. 17)
8
Plug the USB3.0 cable in the back side of the camera. (Fig. 18)
8.10 Connecting the power supply
1
Turn the main switch to “O” (OFF) before connecting the power
supply.
2
Insert the jack of the power supply into the power socket of the
microscope. (Fig.19)
3
Plug the power supply into the mains socket. Check for a safe
connection.
Please use the provided power supply. If lost or damaged, please
refer to qualified service.
Connect the power supply to a grounded (earthed) wall outlet only.
FIGURE 17
FIGURE 18
FIGURE 19
