46
vwr.com I Instruction manual VWR® U Water System
Network
In this interface, you can connect the system to WiFi
network, make sure there is a “√” in the box
，
and then tap
Refresh
to search for your accessible network name
(SSID), enter its password. Tap
Save
to complete the
setting. System restart is required after tapping
Save
.
A clip icon
after network name (SSID) means the
system is connected to this network at present.
Tap
About
to view IP address for the network if needed.
Additional Setting
Activate
Touch-tone
, the control console will make a sound
when you touch the screen.
Also, if activate
Audio Alarms
, the control console will make
beeping sounds when alarm(s) appear(s).
Provide selections to open or close tank recirculation.
User Setup
Manager can add new account to operate the system.
Tap
Add
, then enter a new username and password under
Name
and
Password
to add a new account. Select the user
level under
Permission
.
User is for general user,
dispense water only
.
Manager
means a user has the right
to add new account. Then tap
Submit
to complete the
setup.
Permission Level
Including RFID Config. and Verification.
RFID Config.
Turn on and off RFID alarm.
If the RFID alarm is off, system wouldn’t show alarms for
any RFID error, and can start without cartridges or with
incorrect cartridges.
Verification
Turn on and off
user verification. Users don’t need to enter a
name when replacing consumables if it is checked.
It’s off by default.
