21
vwr.com I Instruction manual VWR® U Water System
Installing the dispenser 3 (171-1275)
a) Take out the base kit and assemble. The base is assembled differently on the left and right
sides of the crossbar. Refer to the pictures below to install the base.
b) Open the side panels of the main system on both sides. Remove the screws as shown below.
c) Remove the corresponding cap from the crossbar. Remove the fixed block from the cap.
d) Insert the holding block into the base and then insert the base into the crossbar. Fix it with the
screw.
Install the base on the
left side of the Genie
Install the base on the
right side of the Genie
Base kit
The left side of the Genie
The right side of the Genie
