34
- Steam producing mode. Set the room temerature by means of
and
buttons. Depending
on the device model, press one, two or three
buttons on the control panel. For quickest steam
producing, switch on the steam generator with its full power. Steam producing starts in appr. 30
minutes. If required, heat the stones in the stove, and close the stove door(s) in the steam producing
mode. Press the
on the control panel. Then, the device is operated automatically. If an inaccesible
temperature value is set on the remoote control, the device will operate continuously. Hereby, the
stones in the stove are also automatically heated to the optimum temperature. If required, you can
reduce steam producing by disabling of one or two steam production stages using
buttons.
Remember that during the device operation in this mode a certain relative humidity value will
correspond to a certain temperature value (the dependence is based on the air water absoorbing
capacity at the certain temperature).
You can effectively get the additional steam by opening the door(s) of the stove and pouring the
scorching stones with water.
- Mixed mode. This mode differes from the steam production mode by the stove open door(s) and
possibility to create the comfortable microclimate in the high-temperature area of the sweating
room.
In this mode, the device is also operated automatically. In all modes, the control panel maintains the
room temperature at the level of +/- Delta (hysteresis) of the set temperature.
By default, the temperature setting hysteresis is +/- 2°С. press the delayed start button
to enable
the countdown mode (time till heater switching on). Press the
and
buttons to set the
Summary of Contents for PARiZHAR
Page 44: ......
