EN
VTS reserves the right to implement changes without prior notice
User’s Manual
6
1.6. SIMPLIFIED CONTROL PANEL - HMI BASIC UPC
1. LCD Display
Indicates actual room temperature or temperature on the
main control sensor as well as a chosen seting, operation
mode, fan speed, time and day of the week.
2. ON/OFF button
Switching between On/Off state (forcing the unit to stop or
enabling operating mode selection)
3. Fan button
Button for mode setting: Auto / Low / Econo / Comfort
4. Clock buttonn
Entering Auto mode. Controller will operate according to the
time schedule stored in Calendar settings.
Note: There are two options for time schedule operation. For
details, follow chapters related to Calendar and to Service
Menu.
Note: If the Calendar is also in Auto mode, the AHU
operation will rely only on protective and energy saving
functions like Standby and Night Cooling. This is possible for
the main Calendar of the controller. The built-in Calendar of
the HMI Basic doesn't support that functionality.
5. Push & Roll knob
Quick, intuitive and easy entering values, changing setpoints,
accepting new values.
Note: To change the temperature setpoint, just turn the
knob.
Display of the room sensor temperature
or the value of the temperature setpoint offset
Note! Setting is limited to 16..26°C
Icons for active recirculation, cooling or heating
Time indication
Display of the fan speed setting or the indication of automatic
fan mode
Indications of the weekdays
Icon for active recovery unit
Icon for alarm event
Icon for Off mode
