+
-
Zoom
In
Zoom
Out
Remote Camera
pan
left/right/up/down
Cursor is small and white when
moved into left (PC) zone
Cursor is big and
blue
when
moved into right (VC) zone
5C.
Camera controls using the keyboard mouse
Cursor is big and yellow when
moved into PIP window (PIP) zone
When in PIP zone the cursor controls
your local camera in the same way the
blue cursor controls the far camera
Left-click (and hold) to
move cameras
Using the mouse to control cameras is very natural … just
point where you want the camera to go.
Hang Up
Address Book
Audio Mute
Video Mute
Volume Control
Send PC
Local Video
My IP Address
Cancel
Left-click on “My IP Address”. This is the number that
other people should call to reach this system. It’s like a
phone number.
The IP address appears on the top of the PC (left)
screen in PC/VC mode. If you are in VC mode (far site
video picture only) the IP address will not appear.
5D. Videoconferencing Menu – Local IP address
Note: VCS 5.0 only detects the user’s IP address when it
launches. If you change your IP while VCS 5.0 is running
it will not know about it and your calls won’t work. To
remedy this problem, just Exit VCS (by selecting Exit
VTEL Now), and then launch VCS 5.0 again.
