7. IR
receiver
2. Video
dongle
X
X
1. DVI
6. S-Video
2601/3201/4201 Series: Attaching VTEL Backpack (PC) to LCD Flat Panel
Mechanical Assembly
A. Mount the camera to the LCD monitor using the camera mounting bracket.
B. Place the camera umbilical cable (cables 3,4,5) behind the PC mounting
bracket and mount the PC assembly to the LCD monitor using four screws
Cable Assembly
1) Attach DVI cable and securely screw it in
2) Attach Video dongle
3) Attach both ends of the camera power cable (part of umbilical)
4) Attach VISCA cable to port labeled VISCA IN (camera) and other
end into upper most COM port (COM 2) (part of umbilical)
5) Attach S-Video cable to camera port and the other end into connector
on video dongle (cable 2) with arrow pointing towards PC
6) Attach one end of this cable to connector on video dongle (pointing
away from PC) and other end to the right-most S-Video receptacle
on the LCD panel
7) Attach the IR receiver to the PS/2 ports on PC.
Be sure to match the keyboard symbol with the
purple/keyboard jack and the mouse symbol
with the green/mouse jack on the PC.
5. Camera
S-Video
3. Camera
power
4. Camera
VISCA
