6
Getting Started
Connecting Power to Base Unit
Plug the AC power adapter into an electrical outlet, and the DC connector into
the back of the Base Unit
Connect to Telephone Lines
Your
VT 20-2438
will work fine even if you only have one telephone line. We
recommend connecting the modular telephone cord to the jack labeled
LINE 1
/ L1 + L2
, located on the back of the Base Unit. Here are steps for connecting
2 lines:
If you have
2 Lines
coming out of a
Single Wall Jack
:
Connect a modular phone cord from the wall jack you want to designate as your
LINE 1, to the
LINE 1 / L1 + L2
jack on the back of the Base Unit. Next, connect
a phone cord from the remaining wall jack to the LINE 2 jack on the Base Unit.
Data Port
Your
VT 20-2438
has a Data Port on the back of the Base Unit.This port provides
an easy way to connect your fax machine, laptop computer, modem or other
telephone device for direct access to
LINE 2
.
The Data Port only provides access to Line 2, so you must have an active line
connected to the
LINE 2
jack on the bottom of the Base Unit. Connect a modular
phone cord from the Data Port (look for the small door marked
DATA
on the
back of the Base Unit to your fax, laptop, etc.
NOTE:
While the Data Port is in use, accidental use of Line 2 by a parallel
phone, your
VT 20-2438
, or a Call Waiting ID alert may interrupt the data
transmission.
Setup
All manuals and user guides at all-guides.com
all-guides.com
