www.vtechphones.com
36
Answering system
Set the remote access code
1. Press
SETUP
twice and you will hear
“Remote access code. To change the setting, press
change.”
. Because the remote access code was set to
19
at the factory, press
CHANGE
and you will hear
the default code
“19.”
3. Press
CHANGE
to advance the remote access code number by one. Press and hold
CHANGE
to advance the remote access code by increments of 10.
4. When the desired number is heard. Press
SETUP
to save and advance to the next menu option
or press
PLAY/STOP
/
to save and exit.
Remote answering system operation
1. From any touch tone telephone, dial your telephone number.
. While the outgoing announcement is playing, enter your two-digit remote access code.
3. Hang up to end the call and save all undeleted messages.
If you pause for more than 10 seconds during remote access, you will hear a help menu listing all
features and commands. If no command is entered for the following 0 seconds, the call will end
automatically.
