VTech mi6885 User Manual Download Page 51

Page: 51 / 60

www.vtechphones.com

Additional information

Troubleshooting

Problem

Suggestion

I lost a handset and

just bought a new one.

How do I register the

new one ?

• Press and hold

FIND HANDSET

on the main telephone base for 10 seconds.

• When the

IN USE

light starts to flash, release the

FIND HANDSET

button.

• Press and release

FIND HANDSET

again. The

IN USE

light will turn off and in a few seconds,

all handsets will be de-registered.

• All handsets will show

NOT REGISTERED

• Place the handset in its charger (connected to a power outlet.) If

PRESS FIND HNDST 4 SECS

ON BASE

does not appear on the screen after a few seconds, lift up handset and place in the

charger again.

• On the main telephone base,
• Press and hold

FIND HANDSET

key for four seconds.

• Release

FIND HANDSET

key when

IN USE

light is on.

• The LCD screen on the telephone base will show,

HS REGISTERE

• The handset will show

HS REGISTERED

and beep once.

After about 10 seconds the handset will emit a tone and the handset will be assigned the lowest

extension number not previously assigned to another system handset (1-4) when successfully

registered. Repeat steps 1 and if handset is not registered within two minutes.

Summary of Contents for mi6885





























































Search results

Summary of Contents for mi6885

Reviews:

Related manuals for mi6885

Brands by name

Popular brands

VTech mi6885, User Manual

Search results

Summary of Contents for mi6885

Reviews:

Related manuals for mi6885

Brands by name

Popular brands