VTech mi6885 User Manual Download Page 21

Page: 21 / 60

www.vtechphones.com

tio

Handset operation

• To end the call, press

INT

OFF

on either handset, or place the

handset back in its telephone base.

If the called handset is out of range or on an external call, when paged,

the display of the calling handset will show:

Call forward

An external call can be forwarded or transferred from one
handset to another.
• If you are on an external call (HS1), you can forward the call to

another handset (HS) by pressing and holding

INT

. HS1 will show

FORWARD TO

and you should input the number of the desired

handset.

• HS will show

INCOMING CALL

and start ringing

• Press

on the HS to answer.

If the forwarded call is not answered within 30 seconds, the external

call will be returned to HS1 and the display will show

CALL BACK

and ring for 30 seconds. If the returned call is not answered within 30

seconds, the external call will end automatically.

CALL BACK

INTERCOM ENDED

UNABLE TO CALL

TRY AGAIN

FORWARD TO:

Call transfer

• While on an external call, a handset (HS1) can transfer the call to another system handset (HS)

by pressing

INT

. The external call is put on hold automatically.

• Select the destination handset number (1-4).

• HS1 shows

CALLING HANDSET 2

(HS).

• HS can pick up the transferred call when it rings and the screen shows

HANDSET 1 IS

CALLING

Summary of Contents for mi6885





























































Search results

Summary of Contents for mi6885

Reviews:

Related manuals for mi6885

Brands by name

Popular brands

VTech mi6885, User Manual

Search results

Summary of Contents for mi6885

Reviews:

Related manuals for mi6885

Brands by name

Popular brands