VTech mi6885 User Manual Download Page 13

Page: 13 / 60

www.vtechphones.com

ett

g s

rte

Registration

After a while the handset will emit series of tones, the newly registered handset will be assigned the

lowest extension number not previously assigned to another system handset (1-4) when successfully

registered. Repeat steps 1 and if handset does not successfully register to the telephone base

within two minutes.

If you are replacing a handset on a system that has the maximum number of registered handsets or

wish to change the assigned handset number of your registered handsets, you must first de-register

the handsets, then re-register all handsets.

De-register all handsets

1. Press and hold

FIND HANDSET

on the main telephone base for 10 seconds.

. When the

IN USE

light starts to flash, release the

FIND HANDSET

button.

3. Press and release

FIND HANDSET

again. The

IN USE

light will turn off and in a few seconds,

all handsets will be de-registered.

4. All handsets will show

NOT REGISTERED

NOT REGISTERED

• If the de-register

process does not

work you may

need to reset

the system and

try again. To

reset: pick up

the handset and

press

Press the

OFF

button and place

the handset back

into the telephone

base.

Summary of Contents for mi6885





























































Search results

Summary of Contents for mi6885

Reviews:

Related manuals for mi6885

Brands by name

Popular brands

VTech mi6885, User Manual

Search results

Summary of Contents for mi6885

Reviews:

Related manuals for mi6885

Brands by name

Popular brands