VS
122-16
Quick start guide
Scan the QR code for
support information
»
Remplacement d’une batterie par un type incorrect pouvant supprimer une protection;
»
mise au rebut d’une batterie dans un feu ou dans un four chaud, ou écrasement mécanique ou coupure d’une batterie, susceptible de provoquer
une explosion;
»
maintien d’une batterie dans un environnement à très haute température pouvant provoquer une explosion ou la fuite de liquide ou de gaz
inflammables;
»
batterie soumise à une pression de l’air extrêmement faible pouvant provoquer une explosion ou la fuite de liquide ou de gaz inflammables.
21. N’utilisez que les adaptateurs inclus avec ce produit. L’utilisation d’un adaptateur dont la polarité ou la tension serait inadéquate risque d’endommager
sérieusement le produit et mettre votre sécurité en péril.
22. La plaque de noms appliquée se trouve au bas ou près du produit.
CONSERVEZ CES INSTRUCTIONS
Pile
•
N’utilisez que la pile incluse ou l’équivalent. Pour commander une pile de recharge, visitez notre site Web au
ou composez
le 800-595-9511.
•
Au Canada, visitez le phones.
ou composez le 800-267-7377.
•
Ne jetez pas la pile au feu. Vérifiez les instructions spécifiques de mise aux rebus auprès des autorités locales.
•
N’ouvrez pas et ne mutilez pas la pile. L’électrolyte qui s’en échapperait est corrosif et pourrait causer des brûlures ou des blessures aux yeux ou à la
peau. L’électrolyte est toxique si avalé.
•
Soyez prudents lorsque vous manipulez les piles afin d’éviter les courts-circuits provoqués par des matériaux conducteurs.
•
Rechargez la pile incluse avec cet appareil, selon les instructions et limites spécifiées dans ce guide d’utilisation.
Stimulateurs cardiaques implantés dans l’organisme
Les simulateurs cardiaques (s’applique uniquement aux téléphones numériques sans fil):
L’organisme ‘Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a mené une évaluation pluridisciplinaire des interférences
entre les téléphones sans fil portatifs et les stimulateurs cardiaques implantés dans l’organisme. Appuyée par l’Administration des aliments et drogues (FDA)
des États-Unis, la firme WTR recommande aux médecins:
Avis aux détenteurs de stimulateurs cardiaques
•
Ils doivent tenir le téléphone sans fil à une distance d’au moins six pouces du stimulateur cardiaque.
•
Ils ne doivent PAS placer le téléphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en
marche.
•
Ils doivent utiliser le téléphone sans fil en l’appuyant sur l’oreille qui se trouve dans la direction opposée au stimulateur cardiaque.
L’étude effectuée par l’organisme WRS n’a pas identifié de risque pour les détenteurs de simulateurs cardiaques causés par les gens qui utilisent un
téléphone sans fil à proximité de ceux-ci.
À propos des téléphones sans fil
•
Alimentation électrique: Les mêmes caractéristiques qui constituent des avantages pour les téléphones sans fil affichent également des restrictions.
Les appels téléphoniques sont transmis entre le combiné sans fil et le socle par le biais d’ondes radio ; il y a donc la possibilité que vos conversations
téléphoniques sans fil soient interceptées par des équipements de réception radio se trouvant dans la portée du combiné sans fil. Pour cette raison,
vous ne devez pas percevoir les communications téléphoniques sans fil comme étant aussi confidentielles.
•
Alimentation électrique: Le socle de ce téléphone sans fil doit être branché à une prise électrique fonctionnelle. La prise électrique ne doit pas être
contrôlée par un interrupteur mural. Les appels ne pourront pas être effectués du combiné sans fil si le socle est débranché ou mis hors tension ou
si le courant est coupé.
•
Possibilité d’interférences aux téléviseurs: Certains téléphones sans fil fonctionnent sur des fréquences pouvant causer des interférences aux téléviseurs
et aux magnétoscopes. Pour réduire ou prévenir de telles interférences, ne placez pas le socle du téléphone sans fil près ou sur un téléviseur ou
magnétoscope. S’il y a présence de parasites, il est conseillé d’éloigner le téléphone sans fil du téléviseur ou du magnétoscope afin de réduire
possiblement les interférences.
•
Piles rechargeables: Manipulez les piles avec soin afin de ne pas les court-circuiter avec des bagues, bracelets ou clés. Les piles ou le conducteur peut
surchauffer et causer des blessures. Respectez la polarité adéquate entre la pile et le chargeur.
•
Les bloc-piles rechargeables à l’hydrure métallique de nickel: Jetez ces blocs-piles de manière écologique et sécuritaire. Ne les incinérez pas et ne les
percez pas. Tel que les autres piles de ce type, elles pourraient dégager une matière toxique qui peut causer des blessures corporelles si elles sont
brûlées ou percées.
The RBRC® seal
The RBRC® seal on the nickel-metal hydride battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and
recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada.
The RBRC® program provides a convenient alternative to placing used nickel-metal hydride batteries into the trash or municipal waste, which may be
illegal in your area.
VTech’s participation in RBRC® makes it easy for you to drop off the spent battery at local retailers participating in the RBRC® program or at
authorized
VTech product service centers. Please call
1 (800) 8 BATTERY®
for information on Ni-MH battery recycling and disposal bans/restrictions in
your area.
VTech’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources.
RBRC® and 1 (800) 8 BATTERY® are registered trademarks of Call2recycle, Inc.
FCC, ACTA and IC regulations
FCC Part 15
This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications
Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation. Privacy of communications may not be ensured when using this telephone.
To ensure safety of users, the FCC/ ISEDC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander
according to the intended usage of the product. This product has been tested and found to comply with the FCC/ ISEDC criteria. The handset may be safely
held against the ear of the user. The telephone base shall be installed and used such that parts of the user’s body other than the hands are maintained at a
distance of approximately 20 cm (8 inches) or more.
This Class B digital apparatus complies with Canadian requirement: CAN ICES-3 (B)/NMB-3(B).
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments
(ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier
must be provided to your telephone service provider upon request.
The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical
requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See the
installation instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are
called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most,
but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your telephone service provider.
This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the
connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your
telephone service provider or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Replacement to this telephone
equipment can only be made by the manufacturer or its authorized agents. For replacement procedures, follow the instructions outlined under the “Limited
warranty”.
If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The
telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible.
You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with
the FCC. Your telephone service provider may make
changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is
required to notify you if such changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may
choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:
Remain on the line and briefly explain the reason for the call before hanging up.
Perform such activities in off-peak hours, such as early morning or late evening.
Industry Canada
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.
Privacy of communications may not be ensured when using this telephone.
The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN is an indication of the maximum number of devices allowed to be
connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum
of the RENs of all the devices does not exceed five.
This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.
California Energy Commission Battery charging testing instructions
This telephone is set up to comply with the energy-conserving standards right out of the box. These instructions are intended for California Energy
Commission (CEC) compliance testing only. When the CEC battery charging testing mode is activated, all telephone functions, except battery charging,
will be disabled.
To activate the CEC battery charging testing mode:
1.
Unplug the telephone base power adapter from the power outlet. Make sure all handsets are plugged with charged batteries before proceeding.
2.
While you press and hold
FIND HS
, plug the telephone base power adapter back to the power outlet.
3.
After about 20 seconds, when the
HOME/FLASH
light starts flashing, release
FIND HS
and then press it again within two seconds. You hear
a confirmation tone. The
HOME/FLASH
light turns on and all handsets display
To register HS... see manual
alternately. Allow up to one minute for
the process to complete.
If the phone fails to enter this mode, repeat all the steps mentioned above. The telephone base will be powered up as normal if you fail to press
FIND
HS
within two seconds in Step 3.
To deactivate the CEC battery charging testing mode:
1.
Unplug the telephone base power adapter from the power outlet, and then plug it back in. Then the telephone base is powered up as normal.
2.
Put the handsets on the telephone base cradle to begin registration.
3.
The handset shows
Registering...
If the registration is successful, the handset screen displays
Registered
and beeps. The handset is registered with
the telephone base.
Technical Specifications
Frequency control
Crystal controlled PLL synthesizer
Transmit frequency
Handset: 1921.536-1928.448 MHz | Telephone base: 1921.536-1928.448 MHz
Channels
DECT channel: 5
Nominal effective range
Maximum power allowed by FCC and IC. Actual operating range may vary
according to environmental conditions at the time of use.
Power requirement
Handset: 2.4 V DC, 400mAh, Ni-MH battery | Base: 6V DC @ 450mA
Power adapter: Output 6V DC @ 450mA (Base). Max. of PS1 or LPS. |
Output: 6V@400mA (Charger). Max. of PS1 or LPS.
Memory
Phonebook: 1000 memory locations; up to 30 digits and 15 characters
Caller ID log: 50 memory locations; up to 24 digits and 15 characters
Call block: 1000 entries
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by VTech Holdings Limited is under license.
VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.
* Includes licenced Qaltel™ technology. Qaltel™ is a trademark of Truecall Group Limited.
The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help
protect our environment. We are proud to mark this product with the ENERGY STAR® label indicating it meets the latest energy
efficiency guidelines.
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories
provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed
and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased
and used in the
United States of America and Canada.
What will VTech do if the Product is not free from defects in materials and workmanship
during the limited warranty period (“Materially Defective Product”)?
During the limited warranty period, VTech’s authorized service representative will replace at VTech’s option, without charge, a Materially Defective Product. If
we replace the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished
Product of the same or similar design. We will retain defective parts, modules, or equipment. Replacement of the Product, at VTech’s option, is your exclusive
remedy. VTech will return the replacement Products to you in working condition. You should expect the replacement to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech replaces a Materially Defective Product under the
terms of this limited warranty, this limited warranty also applies to the replacement Product for a period of either (a) 90 days from the date the replacement
Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1.
Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling,
neglect, inundation, fire, water or other liquid intrusion.
2.
Product that has been subjected to contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like; but then only to
the extent the damage was not caused by incorrectly securing the waterproof handset’s protective elements, for example, failing to properly close
a seal), or such protective elements are damaged or missing (e.g. a cracked battery door), or subjecting a Product to conditions beyond its stated
specifications or limits (e.g. 30 minutes in 1 meter of fresh water).
3.
Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech;
4.
Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems;
5.
Product to the extent that the problem is caused by use with non-VTech accessories;
6.
Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible;
7.
Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional
purposes (including but not limited to Products used for rental purposes);
8.
Product returned without a valid proof of purchase (see item 2 below); or
9.
Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.
How do you get warranty service?
To obtain warranty service in the
USA
, please visit our website at
or call
1 (800) 595-9511
.
To obtain warranty service in
Canada
, go to
or dial
1 (800) 267-7377
.
NOTE:
Before calling for service, please review the user’s manual - a check of the Product’s controls and features may save you a service call.
Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling
charges incurred in the transport of the Product(s) to the service location. VTech will return replaced Product under this limited warranty. Transportation,
delivery or handling charges are prepaid.
VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does
not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of replacement prior to any further replacement
activity. You must pay for the cost of replacement and return shipping costs for the replacement of Products that are not covered by this limited warranty.
What must you return with the Product to get warranty service?
1.
Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or
difficulty; and
2.
Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and
3.
Provide your name, complete and correct mailing address, and telephone number.
Other limitations
This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product.
VTech provides no other warranties for this Product. The warranty exclusively describes all of VTech’s responsibilities regarding the Product. There are no
other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification.
State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to
province.
Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary
use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you. In no event shall
VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the
Product or other associated equipment, the cost of substitute equipment, and claims by third parties)
resulting from the use of this Product. Some states/ provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
Please retain your original sales receipt as proof of purchase.
Disclaimer and Limitation of Liability
VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this user’s manual. VTech
Communications, Inc. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this product.
Company:
VTech Communications, Inc.
Address:
9020 SW Washington Square Road - Ste 555
Tigard, OR 97223, United States
Phone:
1 (800) 595-9511 in the U.S. or 1 (800) 267-7377 in Canada
Important safety instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including
the following:
1.
Read and understand all instructions.
2.
Follow all warnings and instructions marked on the product.
3.
Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
4. CAUTION
: Do not install the telephone base at a height above 2 meters.
5.
Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or a swimming pool, or in a wet basement or shower.
6. Do not place this product on an unstable table, shelf, stand or other unstable surfaces.
7.
Avoid placing the telephone system in places with extreme temperature, direct sunlight, or other electrical devices. Protect your phone from moisture,
dust, corrosive liquids and fumes.
8.
Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To protect them from overheating, these
openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a
radiator or heat register. This product should not be placed in any area where proper ventilation is not provided.
9. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in
your home or office, consult your dealer or local power company.
10. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on.
11. Never push objects of any kind into this product through the slots in the telephone base or handset because they may touch dangerous voltage points
or create a short circuit. Never spill liquid of any kind on the product.
12. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the
telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause
electric shock when the product is subsequently used.
13. Do not overload wall outlets and extension cords.
14. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled onto the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation
instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore
the product to normal operation.
• If the product has been dropped and the telephone base and/or handset has been damaged.
• If the product exhibits a distinct change in performance.
15. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning.
16. Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain circumstances, a spark may be created when the adapter is
plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit.
The user should not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the phone is located in an environment
containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a
fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline
vapors; etc.); a leak of natural gas; etc.
17. Only put the handset of your telephone next to your ear when it is in normal talk mode.
18. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it
is plugged into a ceiling, under-the-table or cabinet outlet.
19. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
20.
CAUTION
: Use only the batteries indicated in this manual. There may be a risk of explosion if a wrong type of battery is used for
the handset. Use only the supplied rechargeable batteries or replacement batteries (BT183642/BT283642) for the handset. Do
not dispose of batteries in a fire. They may explode. Disposed of used batteries according to the instruction.
• Do not use the battery in following conditions:
»
High or low extreme temperature during use, storage or transportation.
»
Replacement of a battery with an incorrect type that can defeat a safeguard.
»
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
»
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid
or gas.
»
A battery subjected to extremely low air pressure that can result in an explosion or the leakage of flammable liquid or gas.
21. Use only the adapter included with this product. Incorrect adapter polarity or voltage can seriously damage the product.
22. The applied nameplate is located at the bottom or near of the product.
SAVE THESE INSTRUCTIONS
Battery
•
Use only the batteries provided or equivalent. To order a replacement, visit our website at
or call 1 (800) 595-9511.
•
In Canada, go to
or call 1 (800) 267-7377.
•
Do not dispose of the battery in a fire. Check with local waste management codes for special disposal instructions.
•
Do not open or mutilate the battery. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic
if swallowed.
•
Exercise care in handling batteries in order not to create a short circuit with conductive materials.
•
Charge the battery provided with this product only in accordance with the instructions and limitations specified in this manual.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless telephones):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless
telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:
Pacemaker patients
•
Should keep wireless telephones at least six inches from the pacemaker.
•
Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON.
•
Should use the wireless telephone at the ear opposite the pacemaker.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones.
About cordless telephones
•
Privacy:
The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone
base and the cordless handset by radio waves, so there is a possibility that the cordless telephone conversations could be intercepted by radio receiving
equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those
on corded telephones.
•
Electrical power:
The telephone base of this cordless telephone must be connected to a working electrical outlet. The electrical outlet should not
be controlled by a wall switch. Calls cannot be made from the cordless handset if the telephone base is unplugged, switched off or if the electrical
power is interrupted.
•
Potential TV interference:
Some cordless telephones operate at frequencies that may cause interference to televisions and VCRs. To minimize or prevent
such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the
cordless telephone farther away from the TV or VCR often reduces or eliminates the interference.
•
Rechargeable batteries:
Exercise care in handling batteries in order not to create a short circuit with conducting material such as rings, bracelets and
keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger.
•
Nickel-metal hydride rechargeable batteries:
Dispose of these batteries in a safe manner. Do not burn or puncture the battery. Like other batteries of
this type, if burned or punctured, they could release caustic material which could cause injury.
ECO mode
This power conserving technology reduces power consumption for optimal battery performance. The ECO mode activities automatically whenever the
handset is synchronized with the telephone base.
For C-UL compliance only
Mesures de sécurité importantes
Afin de réduire les risques d’incendie, de blessures corporelles ou d’électrocution, suivez toujours ces
mesures préventives de base lorsque vous utilisez votre téléphone :
1.
Lisez et comprenez bien toutes les instructions.
2.
Observez toutes les instructions et mises en garde inscrites sur l’appareil.
3.
Débranchez ce téléphone de la prise murale avant de le nettoyer. N’utilisez pas de nettoyeurs liquides ni en aérosol. N’utilisez qu’un chiffon doux et
légèrement humecté.
4. ATTENTION:
Ne pas installer le socle téléphonique à une hauteur supérieure à 2 mètres.
5.
N’utilisez pas ce produit près de l’eau, tel que près d’un bain, d’un lavabo, d’un évier de cuisine, d’un bac de lavage ou d’une piscine, ou dans un
soussol humide ou sous la douche.
6. Ne déposez pas ce téléphone sur un chariot, support ou table chancelants. L’appareil pourrait tomber et être sérieusement endommagé.
7.
Évitez d’installer le système téléphonique dans les endroits soumis à une température extrême, à la lumière directe du soleil ou à proximité immédiate
d’autres appareils électriques ou électroniques. Protégez votre téléphone contre les sources d’humidité, la poussière, les vapeurs et les liquides
corrosifs.
8.
Le boîtier de l’appareil est doté de fentes et d’ouvertures d’aération situées à l’arrière ou en dessous. Afin d’empêcher la surchauffe, ces ouvertures ne
doivent pas être obstruées en plaçant l’appareil sur un lit, divan, tapis ou autre surface similaires. Ne placez pas cet appareil proximité d’un élément de
chauffage ni d’une plinthe électrique. De plus, ne l’installez pas dans une unité murale ou un cabinet fermé qui ne possède pas d’aération adéquate.
9. Ne faites fonctionner cet appareil qu’avec le type d’alimentation indiqué sur les étiquettes de l’appareil. Si vous ne connaissez pas le voltage de votre
maison, consultez votre marchand ou votre fournisseur d’électricité.
10. Ne déposez rien sur le cordon d’alimentation. Installez cet appareil dans un endroit sécuritaire, là où personne ne pourra trébucher sur la ligne
d’alimentation ni le cordon téléphonique modulaire.
11. N’insérez jamais d’objets à travers les fentes et ouvertures de cet appareil, car ils pourraient toucher à des points de tension dangereux ou court-circuiter
des pièces, ce qui constituerait un risque d’incendie ou d’électrocution. N’échappez pas de liquides dans l’appareil.
12. Afin de réduire les risques d’électrocution, ne démontez pas l’appareil, mais apportez-le plutôt à un centre de service qualifié s’il doit être réparé. En
enlevant le couvercle, vous vous exposez à des tensions dangereuses ou autres dangers similaires. Un remontage inadéquat peut être à l’origine d’une
électrocution lors d’une utilisation ultérieure de l’appareil. Débranchez l’appareil avant de procéder au nettoyage. Utilisez un chiffon humide et doux.
13. Ne surchargez pas les prises de courant et les rallonges.
14. Débranchez cet appareil de la prise de courant et communiquez avec le département de service à la clientèle de VTech dans les cas suivants:
• Lorsque le cordon d’alimentation est endommagé ou écorché. • Si du liquide a été échappé dans l’appareil.
• Si l’appareil a été exposé une source d’humidité telle que la pluie ou l’eau.
• Si le produit ne fonctionne pas normalement en respectant les instructions de fonctionnement. Réglez uniquement les commandes indiquées dans
le les instructions de fonctionnement. Les réglages incorrects des autres commandes pourraient provoquer un dommage qui pourrait exiger un
travail exhaustif de la part d’un technicien autorisé afin de rétablir le fonctionnement normal de l’appareil.
• Si le produit a été échappé et que le socle et/ ou le combiné a été endommagé.
• Si le produit affiche une nette diminution de sa performance.
15. Évitez d’utiliser un téléphone (autre qu’un sans fil) pendant un orage. Les éclairs peuvent être à l’origine d’une électrocution.
16. N’utilisez pas le téléphone pour rapporter une fuite de gaz à proximité de la fuite. En certaines circonstances, une flammèche pourrait être provoquée
lorsque l’adaptateur est branché à une prise de courant, ou lorsque le combiné est déposé sur le socle. Ceci est un événement commun associé à
la fermeture d’un circuit électrique. L’utilisateur ne devrait pas brancher le téléphone à une prise de courant, et ne devrait pas déposer le combiné
chargé sur le socle, si le téléphone se trouve à proximité d’un endroit comportant des concentrations de gaz inflammables, moins que la ventilation
soit adéquate. Une flammèche dans un tel endroit pourrait provoquer un incendie ou une explosion. De tels environnements peuvent comprendre:
des endroits où l’on utilise de l’oxygène médical sans ventilation adéquate; des gaz industriels (dissolvants de nettoyage, des vapeurs d’essence, etc.);
une fuite de gaz naturel, etc.
17. Ne placez que le combiné de votre téléphone près de votre oreille lorsqu’en mode de conversation.
18. Ces adaptateurs ont été conçus pour être orientés en position verticale ou montés au sol. Les broches ne sont pas conçues pour maintenir l’adaptateur
en place si celui-ci est barnché dans une prise au plafond ou sous une table/ armoire.
19. Pour le MATERIEL RACCORDE PAR PRISE DE COURANT, le socle de prise de courant doit etre installe a proximite du materiel et doit etre aisement
accessible.
20.
MISE EN GARDE:
Il peut y avoir un risque d’explosion si vous utilisez le mauvais type de piles pour le téléphone. N’utilisez que
les piles rechargeable inclus ou les piles de rechange (BT183642/BT283642). N’incinérez pas les piles. Celles-ci risqueraient
d’exploser. Mettre au rebut les batteries usagées conformément aux instructions du fabricant.
• Évite d’utiliser la batterie dans les conditions suivantes:
»
des températures extrêmes faibles ou élevées auxquelles une batterie peut être soumise pendant l’utilisation, le stockage ou le transport;
Install | Set up
What’s in the box
Your telephone package contains the following items. Save your sales receipt and original packaging in
case it is necessary to ship your telephone for warranty service.
THI
S S
IDE
UP
/ CE CÔ
TÉ
VERS
LE
HAU
T
Bat
tery
Pac
k / Bl
oc-p
iles
:
(2.4
V N
i-MH
)
WARN
ING
/ AVE
RTI
SSEM
ENT
:
DO N
OT
BURN
OR
PUN
CTUR
E B
ATT
ERI
ES.
NE
PAS
INCI
NÉR
ER
OU
PERC
ER
LES
PIL
ES.
Mad
e in
Ch
ina
/ Fa
briq
ué e
n ch
ine
User’s manual
Install the battery
THI
S S
IDE
UP
/ C
E C
ÔTÉ
VER
S L
E H
AUT
Bat
tery
Pac
k / B
loc-
pile
s :
(2.4
V N
i-MH
)
WA
RNI
NG
/ AV
ERT
ISS
EME
NT
:
DO
NOT
BU
RN
OR
PUN
CTU
RE
BAT
TER
IES
.
NE
PAS
INC
INÉ
RER
OU
PE
RCE
R L
ES
PIL
ES.
Mad
e in
Ch
ina
/ Fa
briq
ué e
n ch
ine
THIS SIDE UP
Connect and charge
Battery indicators
Battery status
Action
• The screen is blank, or
shows
Put in charger
and
flashes.
• The battery has no charge
or very little charge. The
handset cannot be used.
• Charge without interruption (at
least 30 minutes).
• The screen shows
Low
battery
and flashes.
• The battery has enough
charge to be used for a
short time.
• Charge without interruption (at
least 30 minutes).
• The screen shows
HANDSET X
.
• The battery is charged.
• To keep the battery charged,
place it in the handset charger
when not in use.
Overview
Handset
• Press to show the menu options.
• While in the menu, press to select an
item or save an entry or setting.
• Quick access to Smart call blocker.
• During a call, press to hang up.
• While in a menu, press to return to
the previous menu, or press and
hold to return to idle mode, without
making changes.
• Press to delete digits while predialing.
• While the phone is ringing, press to
silence the ringer temporarily.
• Press and hold to erase the missed
call indicator when the handset is
not in use.
• Press to make or answer a call using the
handset speakerphone.
• During a call, press to switch between the
handset speakerphone and the handset
earpiece.
• Press to review the phonebook when
the phone is not in use.
• Press to scroll up while in a menu, or
in the phonebook, caller ID log or
redial list.
• While entering names or numbers,
press to move the cursor to the right
(
p
) and left (
q
).
• During a call or message playback,
press to increase (
p
) or decrease (
q
)
the listening volume.
• Press to switch to tone dialing during a
call if you have pulse service.
• While entering numbers, press and hold
to insert a dialing pause.
• While entering names, press to change
the next letter to upper or lower case.
• Press repeatedly to view the last 10
numbers dialed.
• When reviewing a caller ID log entry,
press repeatedly to view other dialing
options.
• While reviewing a caller ID log entry,
press repeatedly to add or remove 1 in
front of the telephone number before
dialing or saving it in the Phonebook.
• Press and hold to set or dial your voicemail
number.
• Enter space characer during text
editing.
• Press to make or answer a call.
• During a call, press to answer an incoming
call when you receive a call waiting alert.
• During a call, press to mute the
microphone.
• While the phone is ringing, press to
silence the ringer temporarily.
• While reviewing the redial list,
directory or caller ID log, press to
delete an individual entry.
• While predialing, press to delete
digits.
• Press to make, answer or end a cell call.
Base
• Press to turn the answering system on
or off.
• Press to delete the playing message.
• Press twice to delete all old messages
when in idle.
• Press to page the system handset.
• Press to increase the listening volume
during a call or message playback.
• Press to increase the telephone base
ringer volume when the base is not in use.
THI
S S
IDE
UP
/ C
E C
ÔTÉ
VE
RS
LE
HAU
T
Bat
tery
Pac
k / B
loc-
pile
s :
(2.4
V N
i-MH
)
WA
RNI
NG
/ AV
ERT
ISS
EME
NT
:
DO
NOT
BU
RN
OR
PUN
CTU
RE
BAT
TER
IES
.
NE
PAS
INC
INÉ
RER
OU
PE
RCE
R L
ES
PIL
ES.
Mad
e in
Ch
ina
/ Fa
briq
ué e
n ch
ine
a
b
c
12 hrs
