Configuration Using the Phone Menus
32
VSP726A Administrator and Provisioning Manual
Using the Network Setting menu
Use the Network setting menu to configure network-related settings for the VSP726A. For
more information about these settings, see
“Basic Network Settings” on page 84
and
“Advanced Network Settings” on page 86
.
To use the Network setting menu:
1.
From the
Admin Settings
menu, press
or
to highlight
Network setting
, and
then press
SELECT
.
The
Network setting
menu appears.
2.
Press
or
to highlight the desired option, and then press
SELECT
:
IPv4
Mode (DHCP, Static IP, PPPoE, Disabled)
Set static IP
Set static DNS
Set PPPoE (Point-to-Point Protocol over Ethernet)
IPv6
Mode (Disabled, Auto, Static IP)
Set static IP
Set static DNS
VLAN ID
To set the network mode:
1.
From the
Network setting
menu, press
or
to highlight your network type (
IPv4
or IPv6
), and then press
SELECT
.
The selected network type screen appears (
IPv4
menu shown below).
2.
With
Mode
selected, press
.
The
Mode
menu appears.
Select
VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299