Using the WebUI
108
VSP726A Administrator and Provisioning Manual
The provisioning process functions according to the Resynchronization settings and
Provisioning Server Settings. The VSP726A checks for the provisioning URL from the
following sources in the order listed below:
1. PnP—Plug and Play Subscribe and Notify protocol
2. DHCP Options
3. Preconfigured URL—Any VSP726A updated to the latest firmware release will have the
Redirection Server URL available as the default Provisioning Server URL (see
“provisioning.server_address” on page 156
If one of these sources is disabled, not available, or has not been configured, the VSP726A
proceeds to the next source until reaching the end of the list.
The provisioning settings are also available as parameters in the configuration file. See
“provisioning Module: Provisioning Settings” on page 156
Provisioning Settings
Using the Redirection Service requires contacting the VTech support team for an
account.
Setting
Description
URL of the provisioning file(s). The format of the URL must
be RFC 1738 compliant, as follows:
"<schema>://<user>:<password>@
<host>:<port>/<url-path>"
"<user>:<password>@" may be empty.
"<port>" can be omitted if you do not need to specify the
port number.
The default URL is the VTech redirect server:
https://et.vtechphones.com/rg2/
VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299