VTech 5831 - VT Cordless Phone Manual Download | Manualshive

Page: 71 / 119

background image

1 8

Sounds& Alerts

With this icon highlighted, press the joystick in or left soft key to reveal the
following options:

Ringer Control(dialing key 2) - this option allows you to change the
Ringer Volume, turn the Ringer On/Off and control the Vibrating
Ringer.

Ringers(dialing key 3) - this option allows you to assign a new Ring
Tone. You can choose one of 8 traditional ringers, and 12 musical
ringers to choose from. Please refer to the Recordable Ringer section
on page 20 for details on how to record your own personalized ringer.

Range Tone(dialing key 6)- this option allows you to turn the Range
Tone On/Off.

Keypad Tone(dialing key 5) - this option allows you to turn the
Keypad Tone On/Off

Low Battery Tone(dialing key 4)--this option allows you to turn the
Low Battery Tone On/Off

Sound Clips(dialing key 1)- this option allows you to record and
access your personal melodies. See the section Recordable Ringer
on page 20 for details.

Press the joystick

to navigate to the desired option and to make the

change, or press the dialing key that is assigned to the icon.

For confirmation, press the joystick in or press SAVE softkey.

Pictures

Your i 5801 is preset with the following number of images:

My Pictures – 10 images

Images – 9 images

Emotions – 10 images

CD ROM – 15 new images (not stored in handset)

You have the ability to assign one image as your background for the idle

Basic Operation

Handset Menu

«
...
69
70
71
72
73
...
»

Summary of Contents for 5831 - VT Cordless Phone
























































































































Reviews:

No comments

Related manuals for 5831 - VT Cordless Phone

Brand: GAI-Tronics Pages: 24

Brand: GAI-Tronics Pages: 20

Brand: Karel Pages: 56

Brand: Karel Pages: 55

Brand: Pantech Pages: 50

Brand: Makita Pages: 84

Brand: Esse-ti Pages: 32

Brand: Uniden Pages: 40

Brand: Yealink Pages: 56

Brand: Swisscom Pages: 84

Brand: AEI Pages: 7

Brand: D-Link Pages: 38

Brand: D-Link Pages: 67

Brand: Virutex Pages: 36

Brand: Samsung Pages: 8

Brand: Samsung Pages: 26

Brand: Samsung Pages: 25

Brand: Samsung Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands